在材料研制中的连续介质细观力学有限元建模现状评论（译文）

评述了机械载荷下材料力学行为有限元模拟的先进技术.分析 了考虑材料微观及细观结构情况下，对材料变形、损伤、断裂进行模 拟时各种方法的优缺点及发展前景.阐述了对材料行为模拟方法的发 展，包括基本的及先进的方法，如体胞方法、真实结构模拟、粘结区 模型等.分析了在先进新材料的开发中运用有限元方法的可能性     

Numerical study of sliding wear caused by a loaded pin on a rotating disc

A computational approach is proposed to predict the sliding wear caused by a loaded spherical pin contacting a rotating disc, a condition typical of the so-called pin-on-disc test widely used in tribological studies. The proposed framework relies on the understanding that, when the pin contacts and slides on the disc, a predominantly plane strain region exists at the centre of the disc wear track. The wear rate in this plane strain region can therefore be determined from a two dimensional idealisation of the contact problem, reducing the need for computationally expensive three dimensional contact analyses. Periodic unit cell techniques are used in conjunction with a ratchetting-based failure criterion to predict the wear rate in the central plane strain region. The overall three dimensional wear rate of the disc is then determined by scaling the plane strain wear rate with a conversion factor related to the predicted shape of the wear track. The approach is used to predict pin-on-disc test data from an Al-Si coating using a tungsten carbide pin. The predicted results are found to be consistent with measured data.     

复合随机振动分析的扩阶系统方法

提出了随机结构系统反应的子空间次序正交分解的思想．基于这一思想，文中导出了一类用于考虑随机激励的随机结构复合随机振动分析的扩阶系统方法，从而可以应用传统的确定性结构随机振动各种分析方法求解复合随机振动问题．作为特例，本文给出了使用模态分析法求解的过程．将文中算例与随机模拟结果相比较，证实了本文思想与方法的实用性．     

不确定非线性动力系统的稳定性分析

本文讨论渐近稳定的非线性名义动力系统在非线性时变扰动下的鲁棒稳定性问题。应用Ｌｙａｐｕｎｏｖ稳定性定理及其推广定理得出了非线性动力系统鲁棒稳定的若干判别准则，并给邮了应用所得准则的实际算例。     

万有引力场中挠性联结双体系统的稳定性与分岔

本文讨论受万有引力矩作用沿圆轨道运动的挠性联结双体系统的平面天平动。讨论其相对轨道坐标系的可能平衡状态。利用Ｌｉａｐｕｎｏｖ直接法分析各平衡状态的稳定性。分析表明，当刚度系数足够小时，平衡状态呆产生分岔和稳定性突变。利用参数空间对系统的全局运动性态作出定性的描述。     

用白光相对客观散斑技术实测海冰力学性质的初探

本文提出了一种改进的白光散技术，应用此技术测量了单轴压缩下海冰的弹性模量，实测结果与电测法的结果符合程度良好，本文方法操作简单，避免了海水的表面缺隐和浸反射条件差以及表面升华等因素对测量的影响。     

Singularity-free augmented Lagrangian algorithms for constrained multibody dynamics

After a general review of the methods currently available for the dynamics of constrained multibody systems in the context of numerical efficiency and ability to solve the differential equations of motion in singular positions, we examine the acceleration based augmented Lagrangian formulations, and propose a new one for holonomic and non-holonomic systems that is based on the canonical equations of Hamilton. This new one proves to be more stable and accurate that the acceleration based counterpart under repetitive singular positions. The proposed algorithms are numerically efficient, can use standard conditionally stable numerical integrators and do not fail in singular positions, as the classical formulations do. The reason for the numerical efficiency and better behavior under singularities relies on the fact that the leading matrix of the resultant system of ODEs is sparse, symmetric, positive definite, and its rank is independent of that of the Jacobian of the constraint equations. The latter fact makes the proposed method particularly suitable for singular configurations.     

线性船舶兴波阻力边界元新方法

采用常数边界元对船舶与流体界面进行离散，求解船舶兴波势及船舶兴波阻力。这种方法可避免在船舶与流体自由面交线上安置节点，因而避免了这些节点建立补充方程。因为满足自由面条件的Ｈａｖｅｌｏｃｋ源函数的源点和场点不能同时在自由面上，使得自由面上的节点无法用Ｈａｖｅｌｏｃｋ源函数的建立方程。如对自由面交线上的节点建立补充方程，则要对线性自由面条件中包含的未知势函数的二阶导数用差分形式表达，引入较大误差。     

Resolving Controversies in the Application of the Method of Multiple Scales and the Generalized Method of Averaging

I compare application of the method of multiple scales with reconstitution and the generalized method of averaging for determining higher-order approximations of three single-degree-of-freedom systems and a two-degree-of-freedom system. Three implementations of the method of multiple scales are considered, namely, application of the method to the system equations expressed as second-order equations, as first-order equations, and in complex-variable form. I show that all of these methods produce the same modulation equations.I address the problem of determining higher-order approximate solutions of the Duffing equation in the case of primary resonance. I show that the conclusions of Rahman and Burton that the method of multiple scales, the generalized method of averaging, and Lie series and transforms might lead to incorrect results, in that spurious solutions occur and the obtained frequency–response curves bear little resemblance to the actual response, is the result of their using parameter values for which the neglected terms are the same order as the retained terms. I show also that spurious solutions cannot be avoided, in general, in any consistent expansion and their presence does not constitute a limitation of the methods. In particular, I show that, for the Duffing equation, the second-order frequency–response equation does not possess spurious solutions for the case of hardening nonlinearity, but possesses spurious solutions for the case of softening nonlinearity. For sufficiently small nonlinearity, the spurious solutions are far removed from the actual response. But as the strength of the nonlinearity increases, these solutions move closer to the backbone and eventually distort it. This is not a drawback of the perturbation methods but an indication of an application of the analysis for parameter values outside the range of validity of the expansion.Also, I address the problem of obtaining non-Hamiltonian modulation equations in the application of the method of multiple scales to multi-degree-of-freedom Hamiltonian systems written as second-order equations in time and how this problem can be overcome by attacking the state-space form of the governing equations. Moreover, I show that application of a variation of the method of Rahman and Burton to multi-degree-of-freedom systems leads to results that do not agree with those obtained with the generalized method of averaging.Contributed by Prof. R.A. Ibrahim.     

A UNIVERSAL APPROACH FOR CONTINUOUS OR DISCRETE NONLINEAR PROGRAMMINGS WITH MULTIPLE VARIABLES AND CONSTRAINTS

IntroductionExtensive research works have been published for solving nonlinear mathematicprogramming problems.Nonetheless,it is still difficult to find an effective and universalapproach for general programming problems with multiple design variables and …